EPS Cement Sandwich Panels (FPB)

  • November 26, 2021 1:17 AM EST
    EPS Cement Sandwich Panel is a kind of lightweight energy saving wall material, which uses cement calcium silicate or reinforced calcium silicate board as face panel, filled with cement, Expanded Polystyrene (EPS) foam particles, and as core material and forming by one time compound.Get more news about Eps Cement Sandwich Panel Supplier,you can vist our website!

    Non-load bearing interior & exterior wall panels, partition wall panels, floor panels, roof panels.
    Bathrooms, kitchens, garages, basements, prefabricated houses, family homes, dormitories, residences, apartments, luxurious villas, factory warehouses, production workshops, auxiliary plants, hotels, bars, shopping malls, restaurants, schools, hospitals, airports, etc.
    Green and environment-friendly, non-harmful substance, no radiation, reusable, no construction waste, widely used in various places.
    Fireproof
    The non-inflammability of the Boyuejia board can be reached national A level standard. Under the high temperature of 1000 degrees, the fireproof feature can last four hours, do not radiate toxic gasses.
    Increased the usable area
    The thickness of the board is between 50mm-200mm. It largely saves the construction space compared with the traditional block.
    Anti-pressure, anti-quake and anti-impact
    Because of fabricated construction, 3-in-1 structure and using tongue and groove to join panels, the anti-pressure, anti-quake and anti-impact all meet the national standard.
    Waterproof and wetproof
    The water container is made of Boyuejia material without any waterproof plaster with no leakage at all. The tests show that the material has good waterproofness and dampproof. Boyuejia material can be used in the wet area such as kitchen, toilet, and basement.
    Sound insulation
    Good sound insulation, sound absorption and noise reduction functions. For example, the amount of sound insulation is up to 40dB with the 90mm thickness of the wall board, which is 2 or 3 times than the traditional wall.
    The wall material is completely dry work, fabricated construction. The materials can be arbitrary cut according to specification. During the construction of transportation concise, pile up, no need of mortal health file, greatly reduction the time duration, and the calibration material, reducing the low construction waste. Easily transported, clearly stack and no mortar batch file largely shorten the construction period. Besides, the construction waste can be reduced by the lowly loss rate.
    Heat preservation
    Wall materials mainly are made from environmental protection and energy saving heat insulation material. With a good heat insulation and preservation function, it can keep the indoor temperature at a stable range and make the environment much more comfortable.